Damian Spangrud to GeoHipster: “Reinvent with a purpose”

Damian Spangrud is a Geographer and Director of Solutions at Esri. Damian often speaks about the role of GIS, technology, and innovation trends. In his 25+ years in the geospatial industry Damian has enjoyed working across a wide range of topics and technology and tweets about all things spatial, weather, and various geeky topics @spangrud.

Damian was interviewed for GeoHipster by Atanas Entchev.

Q: How did you get into GIS?

A: I have always been interested in maps and technology (although separately). After becoming disillusioned with being a Biology major at the University of Colorado Boulder, I switched to Geography and took ‘Automated Cartography’ and was hooked. I didn’t know what GIS was until a year later and ended up with an internship at the City of Boulder, working in the Open Space department. We had PC ARC/INFO, AutoCAD, and ArcCAD (all on Windows 3.0/3.1). The GIS team worked in a small farmhouse and the GIS manager lived upstairs. That turned into a job and eventually led to working in a GIS research lab at Montana State University Bozeman (Sun SPARCstations and electrostatic plotters) and ultimately at Esri.

Q: How did you end up at Esri?

A: I was finishing my Master’s degree in Earth Science at Montana State University Bozeman. I had enough of academics and needed a job. And while Bozeman was beautiful, there were just not many jobs in the area. I had been using GIS and modeling tools as a fundamental part of my thesis, so I sent out a bunch of resumes related to my GIS work (ahh the days before online job searches). Esri and a couple environmental consulting companies contacted me and I was intrigued by the job at Esri as it allowed me to work with new technology. In the summer of 1994 I joined the ArcView 2.0 team at Esri, I was brought on as the Technical Product Manager for ArcView. I ended up writing a LOT of Avenue (that was the scripting language for ArcView), I even wrote the buffer wizard. Over time I became the Product Manager for ArcView, and eventually the Product Manager for all of ArcGIS. Then a few years ago Jack Dangermond (President of Esri) asked that I take on a new role as Director of Solutions to lead a team working on solutions across ArcGIS. In over 20 years at Esri, it is amazing to see the growth of maps into a core part of society/expectations, and especially knowing that GIS people have been behind the scenes making all of this spatial revolution happen.

Q: You are a Director at Esri. What does an Esri director do?

A: An Esri Director is like a Senior VP at most companies. At Esri that means we focus on listening to our users and supporting our teams and making sure we have a strategy, process, and the answers to the hard questions so the teams can focus on getting the work done.

Q: What do you do at work — overall, and in your day-to-day duties?

A: I wear a few hats at Esri so my day-to-day varies considerably. I work with a couple of great teams of people — the Solution team works closely with customers to build ready-to-use apps and maps that help people do more with GIS (http://solutions.arcgis.com/gallery) and the APL (Applications Prototype Lab) team who are always pushing the boundaries of how we use GIS (https://maps.esri.com/). So, I mainly just try to stay out of their way! But I also try to help by providing critical feedback to team planning and direction. In addition, I work across the various parts of Esri to help on our overall strategy, which sounds fun (and it is) but it mainly means lots of meetings and lots of information bits to synthesize. As part of my role I evangelize spatial thinking and GIS at various events around the world and I keep my hands in the technology and make time to focus on individual mapping / analysis projects (some of these are highlighted here).  

Q: A lot has been tweeted about GIS data formats, and about the shapefile in particular. Where do you stand on the pro/con-shapefile continuum?

A: I don’t understand the anti-shapefile feelings. Yes it is old, yes it is messy, yes it has its limitations… But don’t we all? You don’t have to love it, but why expend the energy hating it? Should we use the shapefile as THE primary format for the next 20 years, of course not. I don’t know anyone who thinks it should be. Given the rapid growth of data especially from new sensors and methods, I’m not sure we will ever see a single format as dominant as the shapefile was at its peak. I do love the geopackage, but its adoption is coming at a point where the community is so comfortable using so many formats and across so many platforms that it’s going to be hard for it to become dominant.

Q: You are a Mac person. As (presumably) a Mac fan, how do you reconcile the fact that desktop Esri products never really caught on on the Mac platform? ArcView 2 for Mac was in the works, but never made it to a full release. What happened?

A: Mac person? Seriously? I’m so inept on Macs that my kids know better than ever asking me for help (thank God for YouTube videos). But I digress; I have a copy of ArcView 2.1 for the Mac here at my desk (unopened 3.5 floppy disks!), and we made media and books but we never shipped it. The Mac at that time wasn’t very powerful and while ArcView worked on the Mac… it didn’t work well. ArcView 2x/3x was built on a cross platform technology so we could get it to run on various UNIX platforms (this was pre-linux) and PC. That extra layer of tech, while wonderful at allowing us to work across platforms, added another layer of technology and load on the system. And the Macs of the late 90s were very underpowered for graphics and CPU. We had hoped that the CPU would catch up to PC speeds by the time we released; they didn’t and we just didn’t see the Mac as viable in the late 90s. Macs have since become speed demons but in many local governments they are still a minority (and special and difficult to request), so for the desktop we still see PCs as the main platform, but lots of folks (IRL and at Esri) run ArcGIS on their Macs using Parallels (or similar).

Q: You fly kites, which is probably the most hipstery of all hobbies we have talked about on these pages. Tell us about your fascination with kites.

A: Flying kites is a wonderful interplay of wind, technology and people. It can be both solitary and social as well as calming and exciting, even terrifying on high wind days. As a kid we lived for a few years in Nebraska, where it was always windy. We’d buy those cheap Gayla kites for a couple bucks and have ‘kite wars’, fly them a few thousand feet up, and even tie them to the deck at night and they’d still be flying in the morning. While in Boulder for college I worked at Into The Wind, one of the best kite stores ever!  And I spent most of my paychecks getting more kites (as well as yo-yos). I have all sorts of kites, from tiny kites (postage stamp size with sticks made from ⅛ diameter toothpicks), to huge kites that I anchor to my car. Some are traditional / or “static” kites (you let out string and fly them), others are stunt kites that you control with multiple handles and make spin and swoop at over 90 mph. I don’t get out and fly as much as I used to (various life responsibilities and poor wind quality here in Redlands makes it difficult), but it helps keep me sane.

Q: According to your Twitter bio you are also into food. Anecdotal evidence shows that a higher-than-average proportion of geo people have a strong relationship with food. They know and appreciate good food, they like to cook. I know of some who left the industry to become chefs. What is your relationship with food, and do you think that there’s a correlation between geo and food that warrants further exploring?

A: I have a VERY active relationship with food! I’ve always cooked, and like reading cookbooks, but I’m never good about following directions exactly. I tend to improvise and blend flavors and techniques from other recipes (sort of like my GIS analysis). People have said I should start a restaurant, but I fear that being focused to do something I enjoy would make it less fun for me. I don’t think there is any special relationship between the geo community and food. I think the food community has taken off over the last few years so you just see more of them. (And to the younger generation: learn to cook the basics, it will go a LONG way later in life.)

Q: Do you consider yourself a geohipster? Why/Why not?

A: In the traditional sense, I’m probably not a geohipster. I fit few of the geohipster stereotypes: I don’t have a man-bun, I don’t bike to work, I don’t write JS daily, I’m not a coffee or beer snob, and I like using applications with UIs. That being said, I love maps, mapping, geographic analysis, and geographic science. I feel that we should look at using geographic science in new and interesting ways, making it more approachable and integrated into all aspects of business and science. And I did get maps into two years of the GeoHipster calendar, so that counts for something. So, I’m probably the old odd guy on the edge of the circle, feeding strange ideas and sharing thoughts, hopefully fueling these crazy hipsters to do more (and reminding them to stay off my lawn!).

Q: On closing, any final words of wisdom for our global readership?

  • Don’t be afraid to learn.
  • Reuse tools, code, and apps. Just because it has been done doesn’t mean you can’t reuse those bits to do you own thing.
  • Don’t reinvent just because. Reinvent with a purpose that has real value.
  • Learn enough about projections to be dangerous
  • Fear the rainbow color ramp
  • Normalize your data
  • Always know the minimum mapping unit appropriate for your map and scale
  • Remember Large Scale is zoomed way in (1 : smaller number) and Small Scale is zoomed way out (1: bigger number), but you’ll probably get it wrong 50% of the time.
  • Every map is a lie, but you should make your lies with purpose!

Posted

in

,

by

Comments

One response to “Damian Spangrud to GeoHipster: “Reinvent with a purpose””

  1. Joseph Kerski Avatar

    Thanks for this! I have known and respected Damian for 20 years but I learned some new and inspiring things about him!